Tag Archives: jobs

5 on Friday: Fuel for Thought

by Steve Dust, CEO, Greater Cedar Valley Alliance & Chamber

Fuel for Thought What's Steve Dust Reading this Week? October 30, 2017

One: The Next Industrial Revolution

Joe Kaeser knows manufacturing: he has a high perch from which to view the industrial landscape at Siemens. This is a lengthy, but thought-provoking interview with the Siemens CEO.

Siemens CEO Joe Kaeser on the Next Industrial Revolution, Daniel Gross, strategy+business, February 9, 2016

Two: Dalio on the Two Economies

Honestly, I didn’t really know much about Ray Dalio/Bridgewater until he recently hit the tour circuit for his new book, Principles. I’m about one-third through that book – it’s really good — but recently came across this article he posted on LinkedIn, dealing with what Dalio sees, as many do, with two economies.

Our Biggest Economic, Social and Political Issue The Two Economies: The Top 40% and the Bottom 60%, Ray Dalio, LinkedIn, October 23, 2017

Three: Impact of a Federal Tax Rate Reduction

There’s a lot of rhetoric being thrown – well, shouted — about the proposal to drop the corporate tax rate. When the noise gets too goofy, dive into the data. How many people would get hired or how much of the savings goes to employees? Savings from lower tax payments go to the bottom line, where it is redistributed to investment in productivity – technology, training, and facilities as needed; and shareholders, and employees.

Here’s a short but technical observation that plays off another by Greg Mankiw, with a link to that content in the article linked below.

It’s All About the Rectangles, Steve Landsburg, The Big Questions, October 22, 2017

Four: Nebraska State Budget Woes

Iowa budget issues, attributed in large part to the farm slump, are shared by our neighbors. Here’s a story on Nebraska’s work to identify both the scope of the problem and the priorities needed to adjust spending. Thanks to Jim McKernan for passing this along.

Tough decisions on horizon, senator says, after $195 million drop in projected Nebraska tax revenue, Martha Stoddard, World-Herald Bureau, October 28, 2017

Five: It’s the Halloween Edition

Here’s insight and career advice to a witch who doesn’t want to be a witch anymore. Courtesy of The Muse blog.

Ask a Witch: What Do I Do if Brewing Potions Doesn’t Excite Me Anymore? Jenni Maier, Break Room, The Muse

“5 on Friday” is a two-way street: please send me recommendations on books, reports, articles, blogs, videos, or anything you’re reading or watching that impacts business and the economy.

5 on Friday: Fuel for Thought

One: Yes, the Cedar Valley Was Considered for Apple’s New Data Center

So, I was walking through the office early Thursday afternoon, and Director of Communications Dorothy de Souza Guedes asks, “What’s your big item to accomplish the rest of the day?” “Getting over the depression of hearing the Governor and Tim Cook announce the Apple data center in [deleted] Des Moines,” was my immediate response.

The Cedar Valley was a strong competitor when this was a 300- to 500-acre project. When Apple discovered it could have a 2,000-acre site with similar features, the competition was, practically speaking, over.

The Apple project has spurred Vice President of Economic Development Lisa Skubal and our Economic Development team to work with our regional partners to discover and work to control two mega-sized sites — one with rail and one without. Why two? The data center mega site has much different requirements than, say, a Toyota plant.

These mega sites are not anomalies. Requests are returning to the market after a fairly long absence of demand with a few exceptions – mostly auto assembly plants throughout the United States and Mexico.

The link is to the article discussing the project and the embedded video reviews the incentive package offered.

Apple’s billion-dollar data center ‘puts Iowa on world stage’

Two: VGM Group Took My Blues Away

At the end of the day Thursday, August 24, my blues were chased away by an Alliance & Chamber’s ribbon cutting.

An open house and ribbon cutting celebrated the newest expansion of the VGM Group’s campus at Ansborough and US 20. Wow! Thank you, Jim Walsh, Mike Mallaro, and team for delivering such a stunning new office building to the Cedar Valley market.

Designed to give new amenities to the growing VGM team that now numbers 760 in the Cedar Valley, the building is a $20 million investment that brought the complex to over 190,000 square feet.

Celebrating the opening of this amazing office with a ribbon cutting ceremony, I laughed through Jim Walsh’s “welcome and thank you” remarks. Talking with the VGM team and their VIP guests — many Alliance & Chamber investors — reminded me how grateful we should be for the loyal, growing, investing, employers we have in the Cedar Valley. Thank you, again, VGM.

VGM shows off latest addition at Waterloo complex

Three: Editorial on Job Skills to Fill the Gap

If you are an employer, you know the employability and job-specific skills gap is real. If you’re not a hiring manager or owner, believe us, the issue is real.

It’s troubling when research expresses that vocational training is too specific and stymies older workers from progressing in or to a new career ladder. There are times when we must say “get over it.”

We cannot afford to have a valuable contributor leave the workforce just because they prefer not to be retrained. The incentives that permit that preference need to lead back into lifelong learning and retraining. That’s particularly painful for boomers who love what they’ve done for 30 years. We as a society can’t let these valuable workers slip out of the workforce: the incentive must be to keep learning and keep working through the reasonable career span.

And I almost refuse to give credence to the idea presented in the article below about young men with less than a bachelor’s degree working fewer hours each year because of video games. I know the data is real, but good grief.

This is an editorial of The Courier, which is absolutely on point with the issues of job skills to fill the gap. Thank you, Roy, Nancy, and The Courier team for a very good piece on a critical issue.

Learning job skills is no game

Four: Critical Few Behaviors and Organizational Culture

We’re all looking for ways to make our workplace a place where people are productive for the firm and our clients. There are a lot of people writing and saying stuff about culture. Strategy+Business is a good business journal and accompanying blog with solid content on a broad range of topics.

This short article helps employers and leaders identify keystone behaviors that will contribute to achieving our strategic and operational objectives. It is worth the time to read to get a start prioritizing culture-building activities in terms of implementation and impact.

Getting to the Critical Few Behaviors That Can Drive Cultural Change

Five: The Robot Apocalypse

Investment Advisor Kevin Wilson makes the case I have advanced since 1981: automation is an improvement in our careers and businesses, not a revolutionary challenge to our intellect. Yes, of course, we can conjure a Jetson’s and HAL-lific artificial intelligence tragedy. But let’s back up to where we are in advancing technology, how we’re using it, and how it can leverage our scarce American human capital. Instead, think about how we quickly ramp up from here. That’s what this lengthy, chart-rich SeekingAlpha.com article does.

Much Ado about Nothing: The Robot Apocalypse Is Actually an Economic Renaissance In Disguise

What are you reading that would help me do my job for you? Email me at SDust@CedarValleyAlliance.com.

GREATER CEDAR VALLEY ALLIANCE & CHAMBER TO HOLD FORUM ON WORKFORCE ISSUES

The Alliance & Chamber will host a forum to engage area business and institutions to address talent and workforce challenges in the Cedar Valley. Addressing Workforce: Beyond the Numbers is for employers, educators, and workforce partners to be held Thursday, September 29^th from 7:30 -11:30am at the National Cattle Congress Pavilion, Waterloo.

Recent data compiled by the Alliance & Chamber projects that businesses in the Cedar Valley will need 12,000 additional workers in the next 10 years while, at the same time, the working-age population is expected to decrease.

During the forum, business leaders from a cross-section of industries will facilitate three separate discussion tracks. Human resource professionals, business managers from all industries, education leaders, and service providers who support business with workforce needs are encouraged to participate in the most relevant discussion track.

The three tracks include:

Labor Force Participation (utilizing our existing population)
Training & Education (training the future workforce)
Talent Attraction & Retention (attracting new & retaining existing workforce)

The interactive format will provide opportunities for new connections, partnerships, peer-to-peer learning and a deeper understanding of how to collaborate in addressing our workforce needs for today and the future.

A light breakfast will be served at 7:30am. The event is free. Registration is requested through the Alliance & Chamber website www.cedarvalleyalliance.com by September 16.

For more information on this event and the Talent Solutions initiatives of the Alliance & Chamber contact Danny Laudick by calling 319-232-1156 or by email to dlaudick@cedarvalleyalliance.com.

###

Cedar Valley Grows as Logistics Hub with Addition of Furniture Mart USA

Located in the upper Midwest United States, the Cedar Valley of Iowa is strategically positioned and globally connected through multimodal infrastructure for companies with logistics needs.

The Greater Cedar Valley Alliance & Chamber is proud to have supported the City of Cedar Falls in securing Furniture Mart USA of Sioux Falls, S.D., to build a 150,000-square-foot, $6 million warehouse on 18 acres of land west of the Target Distribution Center perishable foods warehouse at the corner of Venture Way and Production Drive in the Cedar Falls Industrial Park. A retail project is also anticipated. The two projects will employ an estimated 60 people.

The Alliance & Chamber supplied labor and workforce and other information requested by the company.

Manpower Receive 2016 Greater Cedar Valley Alliance & Chamber Diversity & Inclusion Award

Cedar Valley Manpower team celebrate their accomplishments.

The Greater Cedar Valley Alliance & Chamber presented their Annual Awards on Thursday, March 31, 2016.

Manpower creates customized programs to recruit and develop a workforce reflective of the Cedar Valley through effective partnerships with local agencies.

Access2Ability partnership with Iowa Vocational Rehabilitation Services (IVRS) provides job opportunities for those with a disability.

Collaboration with Iowa Workforce Development is putting formerly incarcerated candidates to work. Department of Correction facilities have placed reformed job seekers from the Work Release program into jobs.

Manpower staff serves on the Refugee Resource committee led by Catholic Charities. The goal is to help integrate refugees from Myanmar into the Cedar Valley. The Manpower team developed job opportunities and overcame language barriers by creating work teams of 3-4 refugees, with one member serving as translator.

Manpower provides job preparation advice to students at Waterloo West High and college students through Iowa Association of Business and Industry’s Leadership Iowa University program.

Regional Director Kathy Joblinski is an active member of the Alliance & Chamber’s Chamber Council, its Diversity & Inclusion Partnership, and she is also a member of the Chamber Council’s Workforce Committee.

View the video produced by Pyke Studios here.

View a video of the entire event, including acceptance speeches, produced by Cedar Falls Cable is here.

TechWorks Campus Announces the Launch of the Green@TechWorks

$40M hotel and training center construction set to begin with Tech2 building sale to developer.

(Cedar Valley of Iowa) – The TechWorks Campus, announces the sale of the Tech2 building to Financial District Properties (FDP) and the start of construction of the highly anticipated Green@TechWorks mixed-use project.

Tech2, an 88 year old former John Deere tractor manufacturing building, is the starting point of the Green@TechWorks re-development project. The 180,000 square foot, six-story building will house a 191-room Courtyard by Marriott hotel; third-party restaurant; John Deere Regional Training Center and conference center. The Green is a principal feature of the overall $74M TechWorks Campus river-front re-development.

“It is gratifying to see The Green @ TechWorks become reality. The project will provide our Campus tenants with tremendous amenities just steps from their operations,” said Steve Dust, CEO of the Greater Cedar Valley Alliance & Chamber and President of the TechWorks Campus. “Combined with the industrial 3D printing and design center, labs and shop in Tech 1, and the fantastic new John Deere Tractor and Engine Museum, the opportunities for the TechWorks building sites and the marina become clear. These new operations compliment the downtown Waterloo revitalization and anchors new Cedar Valley developments along the river from Waverly through Cedar Falls to Waterloo. This is a very exciting time in the Cedar Valley.”

Since The Green@TechWorks project was announced in 2012, FDP along with TechWorks has moved forward with steady determination, pursuing federal, state, and local re-development financing, and brokering agreements between the developer, the City of Waterloo, and others.

FDP Managing Principal Rodney Blackwell has significant experience with downtown real estate redevelopment and is recognized for successfully assembling complex financing structures for downtown projects. Earlier FDP projects include the Mississippi Plaza Center in downtown Davenport, IA, and the North American headquarters for KONE Corp. in Moline, IL. FDP is currently developing Machinery Row, a mixed use re-development area in downtown Racine, Wisconsin. FDP also owns the river-front building occupied primarily by the Waterloo-Cedar Falls Courier at 100 East Fourth.

“Despite the inevitable bumps in the road and some unexpected big challenges; creativity, commitment, and a lot of patience tied all the pieces of the financing puzzle together,” says Blackwell. “We are eager to start construction and look forward to delivering a venue that will compliment the Campus and delight the community.”

Helping to finance the project is $12 million from the Waterloo Reinvestment District.

A portion of the TechWorks Campus has also become the first designated Iowa Reinvestment District (IRD). The District, established by The City of Waterloo will provide up to $12M in new state hotel/motel and sales tax revenues generated within the district for capital projects. $8M will be used to pay off bonds financing The Green@TechWorks. $3M will go to the development of the Tech1 building, with $1M boosting a proposed marina development.

The projected economic impact of the District is significant. Up to 562 new permanent jobs will be created to accommodate the anticipated 275,000 annual visitors to the Campus. Visitors are expected to generate $2.9M in annual food, retail and other sales generated on Campus or in the vicinity.

Construction set to begin on The Green@TechWorks.

Interior pre-construction will begin in March with mobilization expected in mid-April. The target opening date for the project is May 2017. The Davenport office of contractor Ryan Companies US, Inc. has been named to complete the project. Ryan Companies’ Greg Lundgren, Midwest President is senior Project Executive Officer.

An estimated 130 people will be employed during the one year construction period. FDP is committed to use local trades and subcontractors to the greatest extent possible. Only when faced with a skill, schedule, or major price constraint outside trades would be sought, according to developer Blackwell.

Amenities for the business class traveler.

Business travelers to the Campus will enjoy the amenities of the 191-room Courtyard hotel, the newest Marriott property in the market. The hotel will be operated by Hospitality Specialists Inc. of Grand Rapids, Michigan. Hospitality Specialists Inc. has been operating hotels for over 30 years with properties in Illinois, Michigan, Wisconsin, Indiana, and Florida.

The John Deere Regional Training Center will be constructed on the 2^nd floor to address a range of skills upgrades for John Deere employees across its operations.

Consolidated Restaurant Operations, Inc. (CRO) of Dallas will expand its footprint to Iowa for the first time with a property in the Tech 2 building. CRO operates more than 91 full-service and 24 franchise restaurants in 17 states and globally. CRO manages brands ranging from the traditional steak house to Tex-Mex. The Green’s restaurant will be a new concept for CRO, consistent with Campus clienteles’ requirements.

$74.1 million TechWorks Campus mixed-use development offers unique opportunities.

The TechWorks Campus site and buildings, donated by John Deere to TechWorks in 2006 is located at the gateway to Downtown Waterloo at Highway 218 and West Commercial Street. The 30 acre TechWorks Campus is currently home to University of Northern Iowa Metal Casting Additive Manufacturing Center and Design Lab, Hawkeye Community College Design Lab, the Iowa Advanced Manufacturing Network Hub, John Deere Tractor and Engine Museum, and Cedar Valley Makerspace. TechWorks Campus is just steps to the Cedar Valley Recreation Trails, entertainment & museum districts, and a variety of Riverloop District amenities.

Four sites are available on the campus for light industrial, research and development, and retail. 100,000 sf remains in the six-floor Tech 1 building for build-to-suit space ideal for light manufacturing and R&D tenants. Six laboratories are also available. Plans for a marina and a riverfront restaurant along the Cedar River are part of the overall $74.1 million Campus development plan.

“Identifying and attracting the right tenant and development is the next priority for TechWorks,” says Cary Darrah, Vice President and General Manager of TechWorks Campus. “My job now is to work with the Greater Cedar Valley Alliance & Chamber development team to help companies understand the tremendous value of locating on the TechWorks Campus. With access to University research and training, a wealth of resources, opportunities to make the right connections and create synergies, the amenities of The Green right outside their door, the Campus location shouldn’t be hard to sell.”

TechWorks Campus is a private non-profit corporation and subsidiary of the Greater Cedar Valley Alliance & Chamber. More information can be found at www.techworkscampus.com or by contacting Steve Dust, President of TechWorks Campus by email sdust@cedarvalleyalliance.com, Cary Darrah, Vice President and General Manager at cdarrah@cedarvalleyalliance.com, or Wes James Facilities Manager at wjames@cedarvalleyalliance.com, or by calling (319)232-1156.

###

TechWorks Bird’s Eye – Looking West (12.2.14) 24×36

Alliance & Chamber CEO Dust to Speak at Dislocated Worker Transition Center Opening

WATERLOO–A new center to assist displaced John Deere workers will open Tuesday, August 18, with a grand opening ceremony at 10:00 a.m. on the Hawkeye Community College Main Campus.

WHAT: Dislocated Worker Transition Center Grand Opening

WHEN: Tuesday, August 18, 2015, 10:00 a.m.

WHERE: Advanced Technology and Business Center, Buchanan Hall

Hawkeye Community College, 1501 East Orange Rd, Waterloo

Iowa Workforce Development received a National Dislocated Worker Grant for $3,058,322 from the U.S. Department of Labor to help displaced workers with job training and employment. More than 1,300 John Deere workers from Waterloo and Ankeny have been laid off since fall 2014, including more than 1,000 from Waterloo. The $3,058,322 grant will assist up to 650 workers with career services. The Dislocated Worker Transition Center will house staff representing IowaWORKS Cedar Valley, Iowa Workforce Development, and UAW Local 838, who can assist dislocated workers with career coaching and pursuing job retraining.

Speakers at the grand opening will include Dr. Linda Allen, president of Hawkeye Community College; Beth Townsend, director of Iowa Workforce Development, Mike Oberhauser, vice president of UAW Local 838, Steve Dust, president and CEO of the Greater Cedar Valley Alliance & Chamber; and other representatives

Winnebago Industries to Expand Operation to the Cedar Valley of Iowa

Officials from Winnebago Industries Inc., the City of Waverly, Iowa, and the Greater Cedar Valley Alliance & Chamber are announcing the planned location of a Winnebago production facility in Waverly, Iowa.

The Winnebago facility will locate in the Waverly’s SW Business Park on 8^th St. SW in 33,400 square foot building. As stated in an earlier press release from Winnebago Industries, the new Waverly facility will be used for wire loom assembly for the Company’s motorhomes.

The Waverly production facility is expected to employ 70 full time workers with a capital investment of $1.5 to $2 million.

The Alliance & Chamber along with the Cedar Valley Regional economic development partners, to Randy Potts, Winnebago’s Chairman, President & CEO after reading about the company’s projected growth in January.

“The announcement of Winnebago’s decision to locate their new facility in Waverly is the culmination of a collaborative effort among Winnebago Industries, Waverly Economic Development, the Greater Cedar Valley Alliance and Chamber and Hawkeye Community College. This effort has resulted in very positive outcome for the entire Cedar Valley Region” said Connie Tolan, Economic Development Specialist, Waverly Economic Development.

“We are very excited that Winnebago Industries has chosen Waverly as the site for their new sub-assembly facility. The addition of a quality employer like Winnebago to Waverly and the Cedar Valley will have a positive impact on the entire Region” said Bill Werger, Community Development Director, Waverly Economic Development.

“The Waverly property was the best fit for the companies immediate and long term needs,” Werger added.

Property acquisition is expected within the next 45-60 days. No timeline has been given for the start of production, but Winnebago anticipates that hiring will begin in June 2015. Those interested in employment are directed to the company website www.winnebagoind.com/company/careers.

“We are pleased to have another legacy Iowa brand locate in the manufacturing hub of Iowa, the Cedar Valley. On behalf of our manufacturers and all businesses and institutions, the Alliance & Chamber welcomes Winnebago to the Cedar Valley of Iowa,” said Steven Dust, CEO, Greater Cedar Valley Alliance & Chamber.

###

Hawkeye Community College to host Advanced Manufacturing Information Session March 16

Hawkeye Community College will hold an information session on upcoming classes in Advanced Manufacturing on Monday, March 16, from 5:30-6:30 p.m. at the Cedar Falls Center, 5330 Nordic Drive, Cedar Falls. The session will include information about the CNC Machining and Industrial Maintenance programs, a tour of the training areas, and the opportunity to visit with instructors.

Industrial maintenance workers maintain, monitor, troubleshoot, and repair equipment used in the production of goods. The Industrial Maintenance program prepares students for entry-level employment in this field. Individuals may earn $27,000-$35,000 per year. Industrial electrical maintenance personnel work overtime frequently. Starting wages do not include overtime compensation.

Industrial Maintenance classes begin April 22, 2015, and run through October 15, 2015. Classes are held Monday-Friday, 10:00 a.m.-4:30 p.m., at the Cedar Falls Center. Students will earn a non-credit certificate of completion.

CNC operators work in a variety of manufacturing environments and are trained to program, set up, and operate a CNC machine, inspect parts, perform production runs, and set up jobs. The CNC Machining program prepares students for an entry-level position. CNC machine operators are in high demand in the Cedar Valley. In four months individuals completing the non-credit certificate may earn $24,000-$33,500 per year, not including overtime.

CNC Machining classes begin April 20, 2015, and run through August 24, 2015. Classes are held Monday and Thursday, 5:00-10:00 p.m., at the Cedar Falls Center. Students will earn a non-credit certificate of completion.

Manufacturers are hiring in the Cedar Valley and need skilled workers to fill high-demand positions. Individuals will be able to sign-up for classes at the information session, as well as learn more about potential financial assistance for qualifying individuals. For more information about either program, call 319-296-4290 or visit www.hawkeyecollege.edu/business-and-community.